PS3 HAN PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

Now Supports 4.84 HFW!

PS3Xploit Team has unveiled the latest progression in the form of an experimental Tool (Debug Settings Installer + Debug/XMB Swappers) for PS3Xploit v3 HAN user's (tools compatible with CFW also), with the release of REBUG REX that means a 4.82 DEX Firmware is out in the wild and that means with 4.82 DEX files, PS3 HAN user's will not have some added features and was one of the reasons why developer HABIB was suggesting user's stay on 4.81 for use of these DEX features as the status was unknown if a public 4.82 DEX would emerge, but with REBUG REX CFW release, the various files for swapping can be done, but devs will lend more details about that throughout this thread.
​

-STLcardsWS​

​

Release Notes >>>> How to Use <<<<

• 
  
  PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers​
  
  
  This tool is released for experimentation purposes only, it is not meant to be installed by every HAN user!​
  
  
  DO NOT TRY SIGNING INTO PSN WHILE DEX ENABLED, YOU CAN/WILL GET BANNED!​
  
  
  CHANGE YOUR NP ENVIRONMENT (thanks @Joonie) to invalid or anything else and reboot to block PSN access.
  
  
  
  This is a set of 3 tools for installing and swapping Debug Settings Files in flash​
  
  
  DEX XML Files Have Support For PS3Xploit/HAN Toolbox XML Menus​
  
  
  NOTE: Once Installed, You Have A DEX Hybrid and Must Choose DEX Checkbox To Use Exploits or Will Freeze! Restoring Is Simple, Just Replace Files With CEX For Your FW Version!​
  
  
  
  WARNING!
  This has the potential to corrupt your system and require you to install OFW (Original Firmware) if not used correctly!

  Power Down PS3 With The Power Button
  Insert USB Stick Into PS3 w/OFW PUP in Correct Folder (/PS3/UPDATE/PS3UPDAT.PUP)
  Push and HOLD Power Button (one beep) Until PS3 Shuts Itself Off (1 single beep + another single beep)
  LET GO OF THE POWER BUTTON
  From Power Off State, Push Power Button (one beep) and HOLD until you hear a single beep, then a double beep
  LET GO OF THE POWER BUTTON
  Plug in PS3 Controller and Select System Update

  
  Exploit Page(s):
  
  
  
  SUPPORTS OFW, HFW, and CFW
  
  HAN "DOES NOT" Need Enabled For This!
  
  UPDATE (2019-03-23): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.84 CEX/DEX!
  UPDATE (2018-04-11): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.82 DEX!
  UPDATE (2018-04-18): DEX Menu Links Have Been Added To DEX XML (category_game_tool2.xml) thanks @DeViL303 >> GitHub Changes Here <<
  
  USE AT YOUR OWN RISK​
• 
  How To Use:
  
  1. 4.82 OFW: Download Debug Settings Installer ZIP archive
     4.84 HFW: Download Debug Settings Installer ZIP archive
  2. Extract the files
  
  to install DEX files + VSH: use files from INSTALL folder and run debug_settings_installer.html
  
  to install CEX files + VSH: use files from RESTORE folder and run debug_settings_installer.html
  
  Main Installation:
  
  • Place all files matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change Debug Settings Menu To CEX/DEX:
  
  • DEX is used as default settings and ONLY use this to swap between CEX/DEX versions of menu
    
  • Place sysconf_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change XMB Plugin To CEX/DEX (Hide/Show Host Info):
  
  • Place xmb_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  
  Run the exploit from page and allow console to reboot fully
  Done! New Debug Settings/XMB Menu will take effect after reboot ​
  
  
  ** You can also create a package that holds resources or files to copy using Extra Tools and use this instead of USB as source. Default directories are /dev_hdd0/game/PS3XPLOIT/extras/ and /dev_hdd0/game/HANTOOLBX/files/​
  
  

Hosted on official site: **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)
(v3 HAN Tools -> Extra Tools -> Debug Settings Installer)

Source Code @: github.com/PS3Xploit/.....
Forum @: psx-place.com​

 

What I can do with Debug settings in ofw

 

i install dex over han enabler with sucess and already reinstall again the ofw 4.82 to go back to normal han and i trie to reinstall the hantoolbox and not apear on xmb the hantoolbox 4.0 how to fix it?

Reinstall the HAN support files, if you installed OFW, then you are on OFW. I already told you on discord 40 minutes ago.

 

Nice Work guys!
but can we now run multiman or not?

 

Nice Work guys!
but can we now run multiman or not?

No

 

Check, if I do not update HAN to the version with support for DEX 4.82, can I still use the console normally, enabling han from toolbox v0.4?

 

Sorry for the answer, but, which are the benefices of switch to DEX in OFW?

Again sorry for my ignorance, do not get angry

 

Sorry for the answer, but, which are the benefices of switch to DEX in OFW?

Again sorry for my ignorance, do not get angry

None really.Its mainly for testing proposes or to fool your friends that your ps3 has dex firmware.

 

DVD/BD Discs don't work only PS3 Discs, why?
My PS3 FW is 4.82 OFW

 

DVD/BD Discs don't work only PS3 Discs, why?
My PS3 FW is 4.82 OFW

this is normal.

 

this is normal.

Ok thanks for answer

 

@esc0rtd3w how do I remove the debug settings? I tried installing the restore files and every time I run the tool with the files on the root of my flash drive, the process succeeds but locks up my console. When I do a manual reboot, the debug settings are still there and PSN access (with the CEX swappers installed) is still unavailable. Is there something I'm not doing right?


EDIT: Just tried again and got the same.

well read the OP. it says check DEX box to restore and use CEX files

 

@esc0rtd3w Have you considered installing all the files to flash, and having the swappers just rename them? it would be much nicer to use these new Xploits that way I think.

yeah its been considered. when 4.x is ready this may be an option

 

Is there error in auto xml han enable i still in cex verion + hn took box 0.4 but when enable han ps3 freeze in han enable , debug enable ???


Sent from my iPhone using Tapatalk

 

Is there error in auto xml han enable i still in cex verion + hn took box 0.4 but when enable han ps3 freeze in han enable , debug enable ???


Sent from my iPhone using Tapatalk

If DEX enabled you will need to use this link instead of the old one http://**ps3xploit.com >Domain no L...e =new)/autoxml/han/han_enabler_auto_dex.html
Just wait a few days until @DeViL303 releases hantoolbox v0.5
CEX users should be able to use the auto enabler without any issues

 

If DEX enabled you will need to use this link instead of the old one http://**ps3xploit.com >Domain no L...e =new)/autoxml/han/han_enabler_auto_dex.html
Just wait a few days until @DeViL303 releases hantoolbox v0.5

No i am in CEX i didnt replace file to DEX IS THERE AN ERROR IN AUTO XML HAN TOOL LINK ????


Sent from my iPhone using Tapatalk

 

Toolbox:
CEX -> no errors
DEX -> freeze

https://twitter.com/esc0rtd3w/status/984168350342402053

Edit: nevermind... still freezing
Blame @esc0rtd3w

Edit2: will test it for dex
If it works blame on you

 

we will be able to sign in with debug settings? ( some day)? @esc0rtd3w

 

CEX -> no errors
DEX -> freeze

freezes in CEX with the automatic links of han toolbox

 

So can I go online as long as i dont enable dex han?

 

freezes in CEX with the automatic links of han toolbox

Yah same to me freeze in auto han tool box link