Warning on ROS1 HASH, Slim NOR

Y

yopichoi

Forum Noob
Hello everybody,

I just got a PS3 for the first time, so I'm new to the scene and I found out about Ps3xploit and decided to try it. I've followed the steps and patched with Success using the FileWriter, so the next step was to dump the NOR Flash and verify it using checker.py, but it returns a Warning.

The instructions say that if there are errors/warnings on both ros0 & ros1 there's risk of bricking the console, so could you please tell me if it safe to restart and install a CFW or if iI should do something else?

Here are what I believe are the relevant lines:

******* Checking CoreOS_region *******
009.01 ROS0 Header : OK
009.02 ROS0 Hash : OK
Size = 0x6FFFE0
MD5 = 4674CA6C38D45171F45C48191528E36F
Version = 4.82 CEX Patched (PS3Xploit v2.0)
009.03 ROS0 unused 0xFF Filled Area : OK
009.04 ROS1 Header : OK
009.05 ROS1 Hash : WARNING!
Size = 0x6FFFE0
MD5 = 1A1E502AAE7609C7E851BD2366FF76BF
Version = (unknown)
009.06 ROS1 unused 0xFF Filled Area : OK

Total number of checks = 156
Number of dangers = 0
Number of warnings = 1
Following check(s) returned a WARNING!
009.05 ROS1 Hash
 
yopichoi said:
Hello everybody,

I just got a PS3 for the first time, so I'm new to the scene and I found out about Ps3xploit and decided to try it. I've followed the steps and patched with Success using the FileWriter, so the next step was to dump the NOR Flash and verify it using checker.py, but it returns a Warning.

The instructions say that if there are errors/warnings on both ros0 & ros1 there's risk of bricking the console, so could you please tell me if it safe to restart and install a CFW or if iI should do something else?

Here are what I believe are the relevant lines:

******* Checking CoreOS_region *******
009.01 ROS0 Header : OK
009.02 ROS0 Hash : OK
Size = 0x6FFFE0
MD5 = 4674CA6C38D45171F45C48191528E36F
Version = 4.82 CEX Patched (PS3Xploit v2.0)
009.03 ROS0 unused 0xFF Filled Area : OK
009.04 ROS1 Header : OK
009.05 ROS1 Hash : WARNING!
Size = 0x6FFFE0
MD5 = 1A1E502AAE7609C7E851BD2366FF76BF
Version = (unknown)
009.06 ROS1 unused 0xFF Filled Area : OK

Total number of checks = 156
Number of dangers = 0
Number of warnings = 1
Following check(s) returned a WARNING!
009.05 ROS1 Hash
Click to expand...
If you get either ros0 OR ros1 valid with PS3Xploit 4.82 detected then the patch was successful, you can reboot & install the 4.82 cfw of your choosing. [emoji6]
If the dump isn't validated by the tool, both ros have warnings/errors or ps3xploit doesn't get detected on working ros, do not switch off your console & post to get further guidance.
 
Thank you very much bguerville. I found out another post with a similar question and you answered there too, so I apologize for making a post with a similar subject.
I restarted and installed REBUG 4.82.1. REX and the PS3 seems to be working fine.

Thank you again!
 
bguerville said:
If you get either ros0 OR ros1 valid with PS3Xploit 4.82 detected then the patch was successful, you can reboot & install the 4.82 cfw of your choosing. [emoji6]
If the dump isn't validated by the tool, both ros have warnings/errors or ps3xploit doesn't get detected on working ros, do not switch off your console & post to get further guidance.
Click to expand...

Just had the same question. Found my answer here :)

fe5d9396c1b56dff5a1e1e3e51176018.png


832cf0ba9abef91223eff3705c4eaa6a.png
 
Last edited:
You must log in or register to reply here.

Similar threads

Back
Top