Dismiss Notice

BEWARE of IMPOSTERS, posing as the PS3Xploit Members/Team:


  -PS3Xploit does NOT have a discord channel, some imposter are using one
 

  -If the info can't be found on ps3xploit.com or psx-place.com its fake
 

  -ZuKuTo / OFWModz is one of the fake names of these imposter's are using to represent the PS3xploit team.

 

 

[ANSWERED] How should i hack my PS3 with Ps3Xploit v2.0 (w/ Flash Writer) or PS3xploit HAN (3.0) ?

Discussion in 'Ps3Xploit [Official Forum]' started by mickael28, Mar 17, 2018.

  1. 184
    73
    57
    Neal Cullum

    Neal Cullum Member

    Joined:
    Jul 15, 2016
    Messages:
    184
    Likes Received:
    73
    Trophy Points:
    57
    Gender:
    Male
    Occupation:
    Security/I.T Geek
    Location:
    United Kingdom
    Also redthetrainer.com is a good website to use for exploit too. that's what i used. If you look for mrmario2011 and skullator on youtube they have great video tutorials. I prefer to watch video tutorials, find it easier to grasp.
     
  2. 15
    3
    7
    Pino

    Pino Forum Noob

    Joined:
    Aug 31, 2018
    Messages:
    15
    Likes Received:
    3
    Trophy Points:
    7
    Gender:
    Male
    Dummy question... Can I grab any REBUG 4.82 CFW to install on my CECH-2004B or I need a specific version?
     
  3. 184
    73
    57
    Neal Cullum

    Neal Cullum Member

    Joined:
    Jul 15, 2016
    Messages:
    184
    Likes Received:
    73
    Trophy Points:
    57
    Gender:
    Male
    Occupation:
    Security/I.T Geek
    Location:
    United Kingdom
    Yeah it'll work, if you have a knackered blue-ray drive then use a no-bd version.
     
  4. 15
    3
    7
    Pino

    Pino Forum Noob

    Joined:
    Aug 31, 2018
    Messages:
    15
    Likes Received:
    3
    Trophy Points:
    7
    Gender:
    Male
    Thanks Neal
     
    Neal Cullum likes this.
  5. 2
    1
    7
    k33purhead

    k33purhead Forum Noob

    Joined:
    Sep 5, 2018
    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    7
    Gender:
    Male
    Trying to install CFW and i get it hit with data is corrupted(8002F957).Followed instructions and im at a loss.Gets to 77% and stops.
    Fat PS3 CECHKO1
     
  6. 1,542
    1,654
    297
    pink1

    pink1 Moderator Developer

    Joined:
    Feb 25, 2015
    Messages:
    1,542
    Likes Received:
    1,654
    Trophy Points:
    297
    Gender:
    Male
    So many guides out I'm not sure what instructions you followed.
    When you made the dump after running the exploit and checked it with the dump checker did it show that I was patched?
    Have you tried a different flash drive? Have you tried a different cfw?
     
  7. 2
    1
    7
    k33purhead

    k33purhead Forum Noob

    Joined:
    Sep 5, 2018
    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    7
    Gender:
    Male
    Nevermind i figured it out.Thanks for quick reply.
     
    pink1 likes this.
  8. 1
    0
    5
    Martin10bonezz

    Martin10bonezz Forum Noob

    Joined:
    Sep 13, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi guys, my process keeps freezing when i get to the patch NOR flash memory step.
    I followed the steps to the letter until I got to that point, and it just froze. It says it may take a few minutes, but its been more than a few. The green "working" light is still flashing but it's not progressing at all, as far as I can tell.
    I checked the SKU model number and the minversion to make sure I was compatible. I don't want to reboot the console as it's still trying because the warning explicitly warns against that. Any help would be great.Thanks
     
  9. 184
    73
    57
    Neal Cullum

    Neal Cullum Member

    Joined:
    Jul 15, 2016
    Messages:
    184
    Likes Received:
    73
    Trophy Points:
    57
    Gender:
    Male
    Occupation:
    Security/I.T Geek
    Location:
    United Kingdom
    Save the exploit page you're on as homepage and clear cookies etc, then exit browser and go back into it as exploit (homepage) then try exploit again
     
  10. 7,843
    6,517
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,843
    Likes Received:
    6,517
    Trophy Points:
    647
    Location:
    Earth
    Afaik a freeze with the Flash Writer 2.0 can only occur if the gadgets are wrong ie if vsh was swapped for instance. There are no random freezes.

    Have you installed OFW 4.82 twice before using the Flash Memory Writer 2.0 as instructed? If not, reinstall the firmware & try the exploit again. Use the hdd version to ensure that usb is not interfering.
     
  11. 3
    0
    5
    Jimmyc12322

    Jimmyc12322 Forum Noob

    Joined:
    Nov 23, 2018
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Gender:
    Male
    Hi I'm new here and am stuck with the ps3xploit 2.0 I've followed the tutorial and managed to dump and flash okay, I'm now stuck on the part of which cfw to download? I downloaded a 4.82.2 rebug one and it got to 75% and said data corrupted. I'm on official firmware 4.82 at the moment. Am I suppose to have 3.55 or something was just confused as it says it can be installed on ofw 4.82
    ? Or is there another firmware I can use thanks
     
  12. 7,843
    6,517
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,843
    Likes Received:
    6,517
    Trophy Points:
    647
    Location:
    Earth
    Have you validated a Flash memory dump using pyps3checker before rebooting to install cfw?
    Did it validate OK showing one of the ros regions as ps3xploit 4.82?
    Did you actually reboot before attempting to install the cfw?

    If you answered yes to all 3 questions then it seems that you didn't follow our instructions correctly. You omitted to install ofw 4.82 twice before starting the Flash memory patching procedure.

    In this case, you now have 2 possible options.
    1. Reinstall ofw 4.82 then redo the whole ps3xploit Flash Writer process.
    2. Remove the internal hdd from the ps3. Plug it into PC & wipe the first few sectors with 00s. Reinsert the hdd, boot & start the cfw pup installation following on screen instructions.
     
  13. 3
    0
    5
    Jimmyc12322

    Jimmyc12322 Forum Noob

    Joined:
    Nov 23, 2018
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Gender:
    Male
    Hi it still says I'm on ofw 4.82 so I've restarted the whole process, by first running the flash 482 exploit right clicking save target as etc. That went though okay. Do I need to dump next or can I just reboot pc and try installing cfw again
     
  14. 3
    0
    5
    Jimmyc12322

    Jimmyc12322 Forum Noob

    Joined:
    Nov 23, 2018
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Gender:
    Male
    @bguerville some success I don't think I flashed the nand memory right before so I done everything from scratch and now it's gone past the data corruption on the cfw and I'm 40% into installing the cfw.
     
  15. 7
    2
    7
    metroplex2k7

    metroplex2k7 Forum Noob

    Joined:
    Aug 26, 2018
    Messages:
    7
    Likes Received:
    2
    Trophy Points:
    7
    Gender:
    Male
    Ok, I am at step c) (using the pyps3checker. I got the program from git hub, I downloaded the latest version of Python (3.7.1) I renamed the dump.jpg to dump.hex. I drag it to the batch file and get this in the cmd box:

    "System cannot find the path specified"
    Do you want to open log file [Y,N]

    So, I'm kinda stuck now...
    Help please?
     
  16. 7
    2
    7
    metroplex2k7

    metroplex2k7 Forum Noob

    Joined:
    Aug 26, 2018
    Messages:
    7
    Likes Received:
    2
    Trophy Points:
    7
    Gender:
    Male
    Nevermind, I found the Python 2.7 download, uninstalled 3.7, installed 2.7, got it working. Number of Dangers and Number of Warnings = 0. So, I guess that's it?
     
    sandungas likes this.
  17. 7,843
    6,517
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,843
    Likes Received:
    6,517
    Trophy Points:
    647
    Location:
    Earth
    No errors, no warnings & one of the ros regions detected as ps3xploit 4.82?

    If so, all is good, you can now reboot & then you will be able to install a 4.82 CFW from the XMB.
     
    Last edited: Nov 25, 2018
  18. 3
    0
    30
    xenocracy

    xenocracy Member

    Joined:
    Oct 31, 2015
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    30
    Can I restart my Ps3 ? look in Attachment Please
    Thank You for help me
    regards xenocracy

    Ps3 Slim CECH-2004A
    Nor Nand

    ok I have tested, Uh Oh I have Luck. Ps3 is Alive
    psx place com threads warning-on-ros1-fat-h-nor.16238

    Question Why not a undo_ flash_482.hex for all Users,
    Is this console specific ?

    Code:
    ROS0 : 482.000
    ROS1 : (unknown)
    WARNING! : unable to get all versions.
    
    ******* Checking CoreOS_region *******
    009.01  ROS0 Header : OK
    009.02  ROS0 Hash : OK
      Size = 0x6FFFE0
      MD5 = 4674CA6C38D45171F45C48191528E36F
      Version = 4.82 CEX Patched (PS3Xploit v2.0)
    
    009.03  ROS0 unused 0xFF Filled Area : OK
    009.04  ROS1 Header : OK
    009.05  ROS1 Hash : WARNING!
      Size = 0x6FFFE0
      MD5 = 838D21A9E8B7F799FCEC0942AA373AEF
      Version = (unknown)
    
    009.06  ROS1 unused 0xFF Filled Area : OK
    
    ******* Checks completed *******
    
    Total number of checks = 156
    Number of dangers = 0
    Number of warnings = 2
    
    Following check(s) returned a WARNING!
      SDK versions
      009.05  ROS1 Hash
     

    Attached Files:

    Last edited: Dec 2, 2018
  19. 7,843
    6,517
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,843
    Likes Received:
    6,517
    Trophy Points:
    647
    Location:
    Earth
    You didn't follow our instructions which is why you have a ros1 hash warning during the dump validation. You were supposed to install 4.82 OFW twice before patching the NOR! You can reboot safely but omitting the double 4.82 installation step may cause an error during CFW installation in certain circumstances.
    If this happens, you will need to reinstall OFW 4.82 then reapply the jailbreak again by going through the same process you just did all over again before you can install a CFW without error.

    And we never produced an undo hex file as we found the idea pointless for 2 reasons.
    1. Users who brick their system do so because they don't validate a dump after flashing process & before rebooting. If they reboot without validation, why would they use an undo hex file at this stage? And once the system has closed down, it cannot boot again, an undo hex file can do no good.
    2. Users who do the validation step as instructed & realise there are errors because they made a mistake & flashed the wrong file should simply patch the NOR again but with the right hex file this time.
     
    Last edited: Dec 2, 2018
  20. 3
    0
    30
    xenocracy

    xenocracy Member

    Joined:
    Oct 31, 2015
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    30
    One more Question for dump.hex
    Can I extract the Level 1 and 2 from the Nor Nand Image ?
    I have no more Idea.

    Is this right ?: lv1_dump and lv2_dump is not in Nor Nand.
    memdump copy from ?

    look:
    ps3 cech-2004A
    idps - console id: 000000010085000xx / dump.hex 2x
    PSID: xx (lev1 lev2)
    PSID from dump.hex 00120730xx / dump.hex 1x

    Greets xenocracy

    PS: Can i write a foreign Nand from a outher Console same Type
    to the Nand same Nand (Nor 16MB). with not Restart the System
    and make a memdump, And copy the original dump.hex back.
    With no Brick ?.

    PS3 NORNAND Statistic V1, FlowRebuilder -> Extract Nand, But i find nothing
    memdump_0.01-FINAL -> lv1_dump_35500.bin, lv2_dump_35500.bin
    multiMAN can import Nand to Nand -> myCEX.EID0.NANDBIN
     
    Last edited: Dec 3, 2018

Share This Page