PS3 PNG to GIM

sandungas said:
Well, it seems you did something wrong
Click to expand...
I compared the custom render plugin.rco MD5 from 4.84 (with the gameboot mod) with the 4.85 and it didn't match, gave a different numbering, maybe that was the cause.
20190928_173634.jpg
 
Last edited:
You are comparing the custom_render_plugin.rco i made... with the official custom_render_plugin.rco used in firmware versions 4.70 up to 4.85

His MD5 are different, obviouslly... because the files are different
 
sandungas said:
You are comparing the custom_render_plugin.rco i made... with the official custom_render_plugin.rco used in firmware versions 4.70 up to 4.85

His MD5 are different, obviouslly... because the files are different
Click to expand...
I did it again step by step as you wrote in the text and once again gave black screen when restarting the console ... I am installing it all over again. I have no idea what is going on.
 
Danxx444 said:
I did it again step by step as you wrote in the text and once again gave black screen when restarting the console ... I am installing it all over again. I have no idea what is going on.
Click to expand...
You said your rco doesnt matches with the "step by step guide" i made... so you should not even try to write it in your PS3

Upload the rco you made, this way i can take a look to try to figure what are you are doing
 
sandungas said:
Hmm, i dont think, the custom_render_plugin.rco you uploaded (with MD5: D93D17AF61A71569123E076C54805F14) doesnt have it enabled
Click to expand...
Yes you are right, I did not enable Zlib compression on this one I sent you, I just checked ... but the others I had enabled, but still did not hit the MD5 of the "fish" password.
 
Danxx444 said:
Yes you are right, I did not enable Zlib compression on this one I sent you, I just checked ... but the others I had enabled, but still did not hit the MD5 of the "fish" password.
Click to expand...
Yes, sorry, i made a mistake when calculating the MD5 for the the fish.zip password
Right now i have a mess of files made by different ways, but you did right all the other steps of what i said :encouragement:

With zlib header compression enabled it should have MD5: 37C683C6C95CAB2EBC470AF4E3E211DA
And without zlib header comrpession enabled MD5. D93D17AF61A71569123E076C54805F14 (like the file you uploaded)

I always enable it, but as far i know both should work
Anyways... the problem you are reporting of a black screen in the next reboot... is something i dont understand

I mean... you said you was able to see the animation, and is displayed very good... so... is working
Then why it fails at next reboot o_O ?
 
sandungas said:
Yes, sorry, i made a mistake when calculating the MD5 for the the fish.zip password
Right now i have a mess of files made by different ways, but you did right all the other steps of what i said :encouragement:

With zlib header compression enabled it should have MD5: 37C683C6C95CAB2EBC470AF4E3E211DA
And without zlib header comrpession enabled MD5. D93D17AF61A71569123E076C54805F14 (like the file you uploaded)

I always enable it, but as far i know both should work
Anyways... the problem you are reporting of a black screen in the next reboot... is something i dont understand

I mean... you said you was able to see the animation, and is displayed very good... so... is working
Then why it fails at next reboot o_O ?
Click to expand...
To make it clear, when I used this rco ... as soon as PS3 gave the first boot, he gave black screen and did not turn off unless I pressed the button until he turns off.
 
Ok, i think i got it @Danxx444 dont do anything yet

I think we had a misunderstanding some days ago, when you was asking how to restore the coldboot/gameboot animations from firmware 1:00

In my post #191 here i uploaded a version with both, coldboot and gameboot remapped in the rco
https://www.psx-place.com/threads/a...e-1-00-2-70-to-4-84.26076/page-10#post-204984
And in my post #194 i uploaded a newer version of it where i deleted 2 lines
https://www.psx-place.com/threads/a...e-1-00-2-70-to-4-84.26076/page-10#post-205000

I thought you reported that both was working (so the most newer version won, just because was smaller)
And... for this mod of the PS4 logo gameboot i been using the second version as the base

The 2 removed lines was related with coldboot2... i guess this is why it fails at the next reboot
Please confirm what im saying is right

Do you remember if you ever tryed the version of post #194 in that thread ?... right now im thinking the problem was in that version
 
sandungas said:
Ok, i think i got it @Danxx444 dont do anything yet

I think we had a misunderstanding some days ago, when you was asking how to restore the coldboot/gameboot animations from firmware 1:00

In my post #191 here i uploaded a version with both, coldboot and gameboot remapped in the rco
https://www.psx-place.com/threads/a...e-1-00-2-70-to-4-84.26076/page-10#post-204984
And in my post #194 i uploaded a newer version of it where i deleted 2 lines
https://www.psx-place.com/threads/a...e-1-00-2-70-to-4-84.26076/page-10#post-205000

I thought you reported that both was working (so the most newer version won, just because was smaller)
And... for this mod of the PS4 logo gameboot i been using the second version as the base

The 2 removed lines was related with coldboot2... i guess this is why it fails at the next reboot
Please confirm what im saying is right

Do you remember if you ever tryed the version of post #194 in that thread ?... right now im thinking the problem was in that version
Click to expand...
Well, when I was at 4.84 I tested the two that you made and were working normally .... But now that I updated to 4.85, I didn't use either of them in the new firmware.
 
sandungas said:
Ok, i think i got it @Danxx444 dont do anything yet

I think we had a misunderstanding some days ago, when you was asking how to restore the coldboot/gameboot animations from firmware 1:00

In my post #191 here i uploaded a version with both, coldboot and gameboot remapped in the rco
https://www.psx-place.com/threads/a...e-1-00-2-70-to-4-84.26076/page-10#post-204984
And in my post #194 i uploaded a newer version of it where i deleted 2 lines
https://www.psx-place.com/threads/a...e-1-00-2-70-to-4-84.26076/page-10#post-205000

I thought you reported that both was working (so the most newer version won, just because was smaller)
And... for this mod of the PS4 logo gameboot i been using the second version as the base

The 2 removed lines was related with coldboot2... i guess this is why it fails at the next reboot
Please confirm what im saying is right

Do you remember if you ever tryed the version of post #194 in that thread ?... right now im thinking the problem was in that version
Click to expand...
And that we are adding to the PS logo is from the post # 194
 
Danxx444 said:
Well, when I was at 4.84 I tested the two that you made and were working normally .... But now that I updated to 4.85, I didn't use either of them in the new firmware.
Click to expand...
The different firmware versions doesnt matters, because the official custom_render_plugin.rco is the same identical file since 4.70 up to 4.85

But do you remember if you rebooted the PS3 when you tryed the file from post #194 ?... incase it had this problem at reboot time maybe you did not realized (because you replaced it by a different one inmediatly before rebooting ?)

And what you did after that ?... i guess you was not using the file from post #194 afther that ?

Danxx444 said:
And that we are adding to the PS logo is from the post # 194
Click to expand...
Yes, but i think if you use the file from post #191 is going to work perfect
 
Well, we are having problems, so no more minigames or challengues, i made it for you
Is based in the custom_render_plugin.rco i uploaded in post #191 of the other thread
I included a readme with the changes and MD5's
At this point you know how i made it, is the same you was doing

FILE: https://www.sendspace.com/file/wbq6ez
 
Last edited:
sandungas said:
But do you remember if you rebooted the PS3 when you tryed the file from post #194 ?... incase it had this problem at reboot time maybe you did not realized (because you replaced it by a different one inmediatly before rebooting ?)

And what you did after that ?... i guess you was not using the file from post #194 afther that ?
Click to expand...
Sorry for not answering immediately, I had a little problem yesterday.

But, yes I remember, I used both normally, restarted the PS3 with them and gave no black screen problem, the PS3 booted normally with the two rco's you made.

It's strange what happened yesterday, if the problem was because in rco # 194 you removed coldboo2, then this problem should have occurred earlier when I was at 4.84.
 
@sandungas, this worked, did not give black screen when starting the console, everything is fine.

It looks so good that it looks like "Official" from Sony, you did a great job, it's amazing!.:encouragement:

Now I want to ask you just one thing, well I want to have two versions of this gameboot, one version with coldboot enabled + gameboot (this one you made, so that's all right) and the other version only with gameboot enabled, without coldboot from SCE.

What code in xml do I have to change to disable coldboot?
 
You must log in or register to reply here.

Similar threads

Back
Top