PS3 HAN PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

Now Supports 4.84 HFW!

PS3Xploit Team has unveiled the latest progression in the form of an experimental Tool (Debug Settings Installer + Debug/XMB Swappers) for PS3Xploit v3 HAN user's (tools compatible with CFW also), with the release of REBUG REX that means a 4.82 DEX Firmware is out in the wild and that means with 4.82 DEX files, PS3 HAN user's will not have some added features and was one of the reasons why developer HABIB was suggesting user's stay on 4.81 for use of these DEX features as the status was unknown if a public 4.82 DEX would emerge, but with REBUG REX CFW release, the various files for swapping can be done, but devs will lend more details about that throughout this thread.
​

-STLcardsWS​

​

Release Notes >>>> How to Use <<<<

• 
  
  PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers​
  
  
  This tool is released for experimentation purposes only, it is not meant to be installed by every HAN user!​
  
  
  DO NOT TRY SIGNING INTO PSN WHILE DEX ENABLED, YOU CAN/WILL GET BANNED!​
  
  
  CHANGE YOUR NP ENVIRONMENT (thanks @Joonie) to invalid or anything else and reboot to block PSN access.
  
  
  
  This is a set of 3 tools for installing and swapping Debug Settings Files in flash​
  
  
  DEX XML Files Have Support For PS3Xploit/HAN Toolbox XML Menus​
  
  
  NOTE: Once Installed, You Have A DEX Hybrid and Must Choose DEX Checkbox To Use Exploits or Will Freeze! Restoring Is Simple, Just Replace Files With CEX For Your FW Version!​
  
  
  
  WARNING!
  This has the potential to corrupt your system and require you to install OFW (Original Firmware) if not used correctly!

  Power Down PS3 With The Power Button
  Insert USB Stick Into PS3 w/OFW PUP in Correct Folder (/PS3/UPDATE/PS3UPDAT.PUP)
  Push and HOLD Power Button (one beep) Until PS3 Shuts Itself Off (1 single beep + another single beep)
  LET GO OF THE POWER BUTTON
  From Power Off State, Push Power Button (one beep) and HOLD until you hear a single beep, then a double beep
  LET GO OF THE POWER BUTTON
  Plug in PS3 Controller and Select System Update

  
  Exploit Page(s):
  
  
  
  SUPPORTS OFW, HFW, and CFW
  
  HAN "DOES NOT" Need Enabled For This!
  
  UPDATE (2019-03-23): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.84 CEX/DEX!
  UPDATE (2018-04-11): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.82 DEX!
  UPDATE (2018-04-18): DEX Menu Links Have Been Added To DEX XML (category_game_tool2.xml) thanks @DeViL303 >> GitHub Changes Here <<
  
  USE AT YOUR OWN RISK​
• 
  How To Use:
  
  1. 4.82 OFW: Download Debug Settings Installer ZIP archive
     4.84 HFW: Download Debug Settings Installer ZIP archive
  2. Extract the files
  
  to install DEX files + VSH: use files from INSTALL folder and run debug_settings_installer.html
  
  to install CEX files + VSH: use files from RESTORE folder and run debug_settings_installer.html
  
  Main Installation:
  
  • Place all files matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change Debug Settings Menu To CEX/DEX:
  
  • DEX is used as default settings and ONLY use this to swap between CEX/DEX versions of menu
    
  • Place sysconf_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change XMB Plugin To CEX/DEX (Hide/Show Host Info):
  
  • Place xmb_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  
  Run the exploit from page and allow console to reboot fully
  Done! New Debug Settings/XMB Menu will take effect after reboot ​
  
  
  ** You can also create a package that holds resources or files to copy using Extra Tools and use this instead of USB as source. Default directories are /dev_hdd0/game/PS3XPLOIT/extras/ and /dev_hdd0/game/HANTOOLBX/files/​
  
  

Hosted on official site: **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)
(v3 HAN Tools -> Extra Tools -> Debug Settings Installer)

Source Code @: github.com/PS3Xploit/.....
Forum @: psx-place.com​

 

@oVxzi yes, HAN Toolbox 0.3 supports DEX.

@DeViL303 is working on 0.5 to support both again AFAIK

going online as retail with DEX is frowned upon by the Sony Overlords and therefore will never be supported most likely

CFW like Rebug can do it because it can load DEX kernel and properly spoof

 

yes, HAN Toolbox 0.3 supports DEX.

@DeViL303 is working on 0.5 to support both again AFAIK

going online as retail with DEX is frowned upon by the Sony Overlords and therefore will never be supported most likely

CFW like Rebug can do it because it can load DEX kernel and properly spoof

I mean like the is there a way to go online right now? Or do I have to put the restore files in to go back online? And cool!!

 

Yeah, just seen that from the post. All I seen was DEX and thought it was a toggle in the Debug settings. My bad. Will there be a new update to toolbox or something so it makes it easier rather then going to the web? And when will going online be fixed? I seen that we can't go online right now, lol.

The Toolbox uses our work but it's not our project, if you want info you need to ask the people developing it.
There is no plan to fix going online when using DEX vsh. This tool was released for advanced users wishing to experiment, you should always read the warnings before installing stuff on your console.

 

I mean like the is there a way to go online right now? Or do I have to put the restore files in to go back online? And cool!!

no for online, yes for restore. just install OFW again from recovery mode

 

The Toolbox uses our work but it's not our project, if you want info you need to ask the people developing it.
There is no plan to fix going online when using DEX vsh. This tool was released for advanced users wishing to experiment, you should always read the warnings before installing stuff on your console.

I mean, yeah I didn't read it that well but all I got to do is put the restore files on and I can go back online, right?

 

I mean, yeah I didn't read it that well but all I got to do is put the restore files on and I can go back online, right?

yup you can also do that. just make sure you tick DEX box when using exploit

 

Rig

yup you can also do that. just make sure you tick DEX box when using exploit

Right. Thanks dude, sorry for not reading fully. XD

 

@oVxzi yes, HAN Toolbox 0.3 supports DEX.

@DeViL303 is working on 0.5 to support both again AFAIK

going online as retail with DEX is frowned upon by the Sony Overlords and therefore will never be supported most likely

CFW like Rebug can do it because it can load DEX kernel and properly spoof

Does the debug settings allow you to access like the CCAPI menu or certain homebrew at all?

 

Does the debug settings allow you to access like the CCAPI menu or certain homebrew at all?

No. Tbh the initial reason for investigating these settings was Fake Save Data owner.
The Debug Settings alone cannot give you true DEX capabilities like running fself or TMAPI, you need the DEX kernel for that.

 

No.

Damn, ok. Thanks. Another small issue I'm having is in the package manager when I go to install packages and standard, it just spins and when I click on it, it freezes for like a sec and just keeps spinning and nothing happens. You know the cause of this?

 

yup you can also do that. just make sure you tick DEX box when using exploit

Now whenever I click package manager I freeze, the F%$#. Ooooof

 

need more details..your best option is just install OFW again.

then run HAN Installer and check everything...then think if you really want DEX features

 

need more details..your best option is just install OFW again.

then run HAN Installer and check everything...then think if you really want DEX features

How to I wipe everything out? I tried restore file system and it's still there.

 

i just told you

you dont need to "WIPE" anything

 

need more details..your best option is just install OFW again.

then run HAN Installer and check everything...then think if you really want DEX features

Like when I click on it, it open and i load up my pkgs then close it and try to open it again and it freezes my console to the point where it makes me connect my controller with the wire and hit the psn button and go through where it rebuilds the database.

 

i just told you

you dont need to "WIPE" anything

How do I install OFW again? Can you link me it?

 

dude, you are making shit way too complicated.

Step 1) Boot to recovery using buttons
Step 2) Download 4.82 PUP
Step 3) Install it on your PS3 from USB (Select System Update Option From Recovery)

 

And

dude, you are making shit way too complicated.

Step 1) Boot to recovery using buttons
Step 2) Download 4.82 PUP
Step 3) Install it on your PS3 from USB (Select System Update Option From Recovery)

And that will clear out package manager and shit so I can redo it all?

 

seriously dude..think about what you are asking??

this will make it 100% ORIGINAL FIRMWARE!!!!!!

you are downloading and installing the PUP From Sony


stop de-railing the thread!!

 

seriously dude..think about what you are asking??

this will make it 100% ORIGINAL FIRMWARE!!!!!!

you are downloading and installing the PUP From Sony


stop de-railing the thread!!

Wasn't trying to but I tried that method and same issue. Idk, guess I'm fucked.