PS3 I bricked my PS3 :( what to do

[littlebalup]

can anyone fix my flash dump? my ps3 cech 3004a

I can.

 

[floky]

o give my your email ay send to you my backup.. tnx

 

[floky]

I can not upload data here

 

[littlebalup]

o give my your email ay send to you my backup.. tnx

Send it by PM. I opened a conversation.

 

[ozekici1985]

If you get a flasher we'll be happy to help you get it fixed. I've helped a few guys do it and haven't had any real problems.

hello i have same problem as well, can you help me about this think plaese ? i'm following this link but i can't fix it

 

[pink1]

Yeah I'll try to help. What part are you having problems with?

 

[ozekici1985]

Yeah I'll try to help. What part are you having problems with?

i don't have backup, i can't start to do anything.

 

[pink1]

i don't have backup, i can't start to do anything.

You need to dump your NOR with your E3 or whatever flasher you have & check it with PyPS3checker. Once you have a good dump that only has 1 warning about the ROS hash you'll use it instead.

 

[ozekici1985]

You need to dump your NOR with your E3 or whatever flasher you have & check it with PyPS3checker. Once you have a good dump that only has 1 warning about the ROS hash you'll use it instead.

Tristate to ground and backup yeah ?

 

[pink1]

Tristate to ground and backup yeah ?

Yeah, then check the dump with PyPS3checker & if it's good keep going with the guide.

 

[ozekici1985]

Yeah, then check the dump with PyPS3checker & if it's good keep going with the guide.

ok thank you very much,i'll write the result,and one more think. is the solder points are same with 2xxx series ? i have e3 flasher and clip is not working. i need to solder the cables

 

[pink1]

ok thank you very much,i'll write the result

If you have any problems let us know and we'll do our best to help you get it figured out. Be sure you don't flash anything until you are sure your dump is 100% good because that can end with a brick that can't be fixed.

 

[ozekici1985]

what sould i do now ? i clicked force patch,checker create a file bkpps3 patched. if i write this dump to the console is it done ? because i saw this "!!WARNING!! If you are using an E3 flasher, you must do a byte swap of your dump before to rename it "bkpps3.bin" and to fash it."

 

[ozekici1985]

what is the switches positions ? 1. UP and all DOWN ?

 

[pink1]

what is the switches positions ? 1. UP and all DOWN ?

Sorry I fell asleep lastnight. What step are you on now, the flashing back? if so yes that is right.

 

[ozekici1985]

Sorry I fell asleep lastnight. What step are you on now, the flashing back? if so yes that is right.

i reflash it again,it's working now but i can't start to install OFW now,because controller is not connecting to the console

 

[pink1]

i reflash it again,it's working now but i can't start to install OFW now,because controller is not connecting to the console

Is it an official controller?

 

[psykosis]

DS3 was the only controller worth the money they wanted for it. Always worked out of the box, no issues. Always did what I needed. Nothing like that Ripoff controllers with no PS button on them, or extra dongles, or other weird quirky issues that made them not even worth the money they charged for them...

 

[ozekici1985]

yes it's ok now everthing is perfect... Thank you very very very much

 

[pink1]

yes it's ok now everthing is perfect... Thank you very very very much

Glad you got it bud, now you can start playing with han if you installed 4.82.