[REQUESTING DUMPS] Slim 3.60 25xx/3xxx SuperSlim NOR/eMMC Consoles

[playerkp420]

Thanks you for those dumps.
Note that the second half of your "CECH-4001C.bin" dump is totally corrupted with a bunch of 0x10 / 0x10 repetitions starting at 0x81DF00 until the end of the file.

was a good exercice anyway

I must have a good dump of that board somewhere. Unless I saved a bad one by mistake. I still have that mobo lying around. Will make a good dump if I can't find it on my PC.

 

[littlebalup]

I must have a good dump of that board somewhere. Unless I saved a bad one by mistake. I still have that mobo lying around. Will make a good dump if I can't find it on my PC.

This may help you to find your mobo :

board_id (part of console S/N) : 27445921
kiban_id (board barcode) : 402514228205

 

[jbuck1975]

it won't let me post my link to my dump

 

[Hasan]

I'm sorry i know this is not the right thread but i need a straight answer can i or can i not use a E3 flasher on 3k im not trying to go down to 3.55 i just want to know can i use it to downgrade at all to anything higher than my minimal checker anything at all for my 3001 like update 3.70 or 3.80 or 3.90 or 4.81

 

[Csalretepman]

Dump my ps3 ss 4.53 4008a with e3 ode drive . google . com / file / d/ 1VWJte5leRfMTX-k5MEr3zBEVCQfR95d0

 

[Hasan]

it won't let me post my link to my dump

put spaces between http and www and .com to post a link

 

[jbuck1975]

www . mediafire . com / file / 0o5633f6yn4apwh / 4201a - emmc . hex

 

[Hasan]

nope i've put all kinds of spaces.

heres an example http:// www. psx-place . com / threads / requesting - dumps-slim-3-60-25xx-3xxx - superslim - nor - emmc - consoles . 16133 / page - 4#post - 100351 http://www.psx-place.com/threads/re...im-nor-emmc-consoles.16133/page-4#post-100351

 

[Hasan]

see i put a lot of spaces between - . ? = and / \

 

[pink1]

I have dumped my 4003A but idpsmasker just opens and closes? Don't know really if that means anything? Dont really know if I've done it right any way to share privately first? I am 4.81 so if that dumps any good would be happy to do 4.82ofw


Sent from my iPhone using Tapatalk

That's how the masker works, the time on the file should change tho.
I can update the masker with some output to the screen or something if you guys think it needs it.

 

[sandungas]

That's how the masker works, the time on the file should change tho.
I can update the masker with some output to the screen or something if you guys think it needs it.

Just had an idea for that, you can show 2 lines with:
Original IDPS: 00 00 00 01 00 89 00 0B 14 00 EF DD CA 25 52 66
Masked IDPS: 00 00 00 01 00 89 00 0B 14 00 FF FF FF FF FF FF

This way if the user runs the app again is going to see both (original and masked) with the 0xFF's at the end
And... well, you can add a check to identify this behaviour and show a message like... "this dump was already masked"

 

[TOM1211]

That's how the masker works, the time on the file should change tho.
I can update the masker with some output to the screen or something if you guys think it needs it.

Can I send it you too check?

 

[pink1]

Can I send it you too check?

You can send me a pm if you'd like.

 

[pink1]

Here is the dump from @TOM1211 http://www.mediafire.com/file/fetvg03bpe3bkk5/dump.hex
I think it's a 4003a on 4.81 right?

 

[TOM1211]

Here is the dump from @TOM1211 http://www.mediafire.com/file/fetvg03bpe3bkk5/dump.hex
I think it's a 4003a on 4.81 right?

Yes, Thankyou for your help with checking and posting, hope this helps out or just intresting, as said can update to 4.82 and post that (probably with some help) if anyone would like.

 

[saintmaximilian]

i have a cech 3001a already post my dump, with 4.50 firmware, , just a question, could be usefull if I update to a newer version like 4.7 and post that dump?

 

[Zenug]

Hi,
I gained my console from a friend, it had been fixed a few times and it probably is without its original shell. in it shows on the label that this is a 4214B, but how can I be sure that this model is really the correct one?

 

[littlebalup]

Hi,
I gained my console from a friend, it had been fixed a few times and it probably is without its original shell. in it shows on the label that this is a 4214B, but how can I be sure that this model is really the correct one?

We can get a part of the console serial number from the dump. So, will see if it matches the S/N on your console case.

 

[Hasan]

can someone just give me a guess on when this exploit will be released

 

[jbuck1975]

can someone just give me a guess on when this exploit will be released

My guess is last week